Best BBC MicroBit Kits

Discover Our MicroBit Kits Features

The term “IDE” often refers to an “Integrated Development Environment.” It is a software application that provides comprehensive facilities for picobricks development. You can do block coding or text based coding with the IDE!

The following products are STEM compatible robots that you can buy with our MicroBit kits. Each one addresses a different STEM field.

Mars Explorer

Boom! Do you want to make a rogue tank with wide tracks that wanders around? Mini tank addon is exactly for you! Can be done with motor driver bricks and main board!

Pass Box

"Silence!! There is confidential information that I must keep secret. But I don't trust safes. Secure safe addon specially for those who say 'It is best to make my own safe. " A very fun project with potentiometer, main board, OLED screen and button.

Trash Tech

You're one of those people who don't want to touch the trash can, right? Yes we know. One of our developers thought so too. So what did we do, smart trash can! Wola!

Touch Board Brick

The touch board module is a module with 14 touch sensors. You can create touch-sensitive projects by touching the designated areas on the board.

RGB LED Brick

RGB LED Module; It is a module that allows obtaining secondary colors by changing red, blue and green colors between 0-255. The PicoBricks development board has 3 addressable RGB LD sensors.

Micro:Bit Brick

The main board module is a module that enables communication between the Micro:Bit and PicoBricks. You can establish connections with all modules without the need for cable connections, by connecting the Micro:Bit to the connector designated for the Micro:Bit on the module.

Screen Brick

Thanks to the OLED Module, images, text, GIFs, etc. can be displayed on the 128 x 64 OLED screen. We can create image outputs.

Button and Potentiometer Brick

In the button and potentiometer module, we can provide physical input to the circuit. A potentiometer is an adjustable resistor. By turning the potentiometer on PicoBricks, we can change the resistance value entering the circuit. By pressing the button on the module, we can provide a digital input to the circuit.

Motion Brick

It is a module that returns the motion detected from the environment as a digital value (0 or 1). We can create a systems that detects motion in the environment

Relay Brick

The relay is an electronic switch. If it allows the current to pass through it, the value of the relay will be "1", otherwise it will be "0". Using the PicoBricks Relay module, we can control the current going to different electronic devices.

Motor Driver Brick

The motor driver module is used to control the motors by microcontroller.. These modules provide the power needed to control the motor and can often control the speed, direction. Thanks to the motor driver module, we can operate 4 servos and 2 DC motors at the same time.

Temperature and Humidity Brick

It is a module that allows us to detect the temperature and humidity values of the environment. The module detects the temperature value of the environment with + / - 0.2-degree accuracy and humidity value with a 2% tolerance of error.

Light Sensor Brick

It is the sensor that allows us to detect the amount of light in the environment. It returns an analog value based on the amount of light in the environment.

Action Brick

Thanks to the Gesture module, we can detect the direction of hand-arm movements, the colour of an object brought close to the module, the light value of the environment, and proximity values, and use them in our projects.

Wireless Brick

The Wireless module has two different sensors. The first of these sensors is the ESP01 Wi-Fi sensor, and the other one is the IR receiver. By utilizing these sensors with the Bluetooth sensor on the MicroBit, you can create IoT projects.